ASI 045224 Roll Paper Towel Dispenser

American Specialties (ASI 045224 Roll Paper Towel Dispenser)

Recessed Roll Paper Towel Dispenser shall hold and dispense one 8 in. or 9 in. (203mm or 229mm) wide standard towel roll up to 800 ft.
(244m) long and one stub roll up to 4 in. (102mm) diameter. Unit shall be fabricated of alloy 18-8 stainless steel type 304, 22 gauge; rear panel of unit shall be 18 gauge. A dispensing mechanism shall be supplied. Door shall be attached to cabinet at side with a full length 3/16 in. (5mm) multi staked piano hinge and shall be held closed with tumbler lock keyed alike to other ASI washroom equipment. Face trim shall be 1 in. (25mm) wide formed from one piece with no miters, welding or open seams and shall have a 1/4 in. (6mm) square return to wall.
Structural assembly of all components shall be of welded construction. All exposed surfaces shall have a No 4 satin finish and shall be protected with a PVC film easily removable after installation.

Towels are fed by lever action until supply is depleted. Unit may be reloaded with a full roll to automatically start when finished with an existing partial (stub) roll.

LOW PRICE GUARANTEE - See Quantity Discounts Below

Please call 877.837.7745 or EMAIL sales@newtondistributing.com