ASI 9467 Paper Towel Dispenser/Waste Receptacle

American Specialties (ASI 9467 Paper Towel Dispenser/Waste Receptacle)

Profile Collection Recessed Paper Towel Dispenser and Waste Receptacle shall hold and dispense 800 standard multi-fold or 600 standard C-fold paper towels and shall have a waste capacity of 4.5 gallons (17 liters). Cabinet and dispenser unit shall be fabricated of 20 gauge type 304 stainless steel alloy 18-8 with 1 in. (25.4) wide perimeter trim to lay flat against wall. All exposed surfaces shall have No 4 satin finish. Full-face door shall be 16 gauge and shall be free of miters, welding or open seams with 3/4 in. (19) radiused vertical edges and 15/16 in. (24) square horizontal returns to wall. Door shall be attached to the edge of unit with a concealed full length 3/16 in. diameter stainless steel multi-staked piano hinge and shall be held closed with two (2) flush rimless tumbler locks
keyed alike to other ASI washroom equipment. Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety. Waste receptacle shall be fabricated of stainless steel with hemmed edges and shall have a welded on finger pull for ease of service removal and maintenance safety. Structural assembly of body and door components shall be of welded construction.

Paper towels are manually withdrawn through dispensing slot until towels are depleted. Unit will continue to feed properly when reloaded with a partial load in place. Refill dispenser by unlocking door and replacing towels for an empty or partially empty unit. Dispenser supply is replenished and waste container is emptied manually on cycles determined by maintenance needs. Locking full-face door over compartments prevents unauthorized access or removal.

LOW PRICE GUARANTEE - See Quantity Discounts Below

Please call 877.837.7745 or EMAIL sales@newtondistributing.com