B-633 48 inch Corner Guard

(B-633 48 inch Corner Guard)

Stainless steel corner guard, Corner guard shall be one-piece 18-gauge (1.2mm), type-304 stainless steel with satin finish. All exposed edges and corners of unit shall be rounded; sharp edges are not acceptable. Corner guard shall be furnished with pressure-sensitive adhesive for attaching unit to wall surface. Corner Guard Unit is furnished with special adhesive backing for easy and permanent mounting. Wall must be clean and dry. If necessary, remove all traces of grease and oil from wall surfaces using a good cleaning solvent. To install corner guard, remove paper backing from adhesive. Press corner guard firmly against wall. Wall temperature should not be less than 70°F for proper installation.