ASI 3451 Swing Up Grab Bars

American Specialties, Inc. (ASI 3451 Swing Up Grab Bars)

Swing-Up Grab Bar shall be fabricated of alloy 18-8 stainless steel type 304. Grab bar tubing shall be 1-1/4 inch (32mm) dia. 18 gauge. Mounting bracket shall be 7 gauge plate with six (6) 5/16 in. (8mm) dia. mounting holes provided and shall have 1-1/4 inch (32m) dia. x 3/16 inch (5mm) wall tubing hinge riding on solid bar axle with twin torsion-spring counter balance. All exposed surfaces shall be No 4 satin finish.
Structure shall be of welded construction. All exposed edges and corners shall be radiuses and burr free. Vertical position gravity lock with manual release shall be provided. Tamper resistant set screw shall be provided to allow owner to lock grab bar in vertical position. Internal mechanisms shall be captive and suitable for heavy duty service. Grab bar shall be operable with only one hand.

Swing-Up Grab Bar is manually lowered to horizontal position for support and raised for departure or arrival. Gravity lock prevents grab bar from dropping from the vertical position, and must be manually released to lower grab bar. Lock does not affect raising bar from horizontal and automatically locks bar when bar is returned to vertical storage position.